Evaluation of Changes in Oral Microflora in Children with Early Childhood Caries after Full Mouth Rehabilitation.

Aim: To evaluate the change in microflora in children suffering from severe early childhood caries (ECC) after full mouth rehabilitation. Materials and methods: A total of 60 children, aged 3-5 years suffering from severe ECC who fulfilled the inclusion and exclusion criteria were included in the study. Pooled plaque samples were taken and subjected to quantitative reverse transcriptase polymerase chain reaction (PCR) to obtain baseline mean values of Streptococcus mutans (S. mutans), Streptococcus sobrinus (S. sobrinus), Candida albicans (C. albicans), and Candida dubliniensis (C. dubliniensis) before full mouth rehabilitation was done under general anesthesia. Posttreatment samples were collected at 6, 12, and 18 months. Wilcoxon signed-rank test was used to compare the mean values of S. mutans, S. sobrinus, C. albicans, and C. dubliniensis before and after full mouth rehabilitation. Results: A total of 60 patients recruited for the study were present at the follow-up at 6 and 12 months. At 18 months, 55 patients returned, and five were lost due to follow-up. A statistically significant reduction was seen in all microorganisms at 6, 12, and 18 months compared to baseline values. At 18 months a slight increase in S. mutans, S. sobrinus, and C. albicans was seen. C. dubliniensis was not detected in any cases after full mouth rehabilitation. Caries recurrence was seen in four patients at 18 months. Conclusion: Significant reduction of S. mutans, S. sobrinus, C. albicans, and C. dubliniensis was seen at 6, 12, and 18 months. A complete reduction of only C. dubliniensis was seen. A significant but not permanent reduction of S. mutans, S. sobrinus, and C. albicans. Caries recurrence was seen in 7.27% of patients at 18 months. How to cite this article: Mathew MG, Jeevanandan G, Rathod NN. Evaluation of Changes in Oral Microflora in Children with Early Childhood Caries after Full Mouth Rehabilitation. Int J Clin Pediatr Dent 2024;17(1):21-25.

Less Is More: A Case Report on All-on-4 Prosthesis.

Severe alveolar ridge atrophy following tooth removal poses a common and worsening issue in edentulous jaws, affecting patient comfort and quality of life. The All-on-4 approach involves axially positioning two anterior implants and distally orienting two posterior implants, reducing cantilever length and enabling prostheses with 12 teeth. This less invasive option, utilizing distal tilting of implants at 30°, offers biomechanical advantages and has shown short-term success, though long-term research is limited. Immediate-loading treatments are gaining popularity for their high survival rates. Understanding the biomechanics of implant-supported prostheses is crucial for long-term success, emphasizing the importance of optimal occlusal schemes. Challenges such as bone defects and surgical complexity have led to the exploration of achieving full-arch fixed restorations with fewer implants, building upon Brånemark's early work with four implants. The All-on-4 concept, originating in 1999, proves to be a viable treatment option, providing excellent long-term results and improved load distribution in challenging clinical circumstances. This case report explores the successful rehabilitation of a jaw using the All-on-4 implant prosthesis concept, a technique strategically placing four implants in completely edentulous jaws to support a fixed, immediately loaded prosthesis.

Interdisciplinary full mouth rehabilitation of a patient with amelogenesis imperfecta from childhood to young adult-hood: A 12-year case report.

Treatment of patients with amelogenesis imperfecta extends over many years, from childhood to early adulthood. Their management at any age is complex and has to be adapted in relation to therapies validated in the general population.

Mouth opening limitation and influence of age and surgical location for static fully guided dental implant placement: an observational, cross-sectional clinical study.

The influence of age and region of the mouth was assessed in regard to mouth opening in fully guided implant placement. Ninety patients were included in this study, 30 in each of three age groups (20-34, 35-55, and >55 years). Maximum passive mouth opening was recorded in three locations: incisal, canine, and molar. The minimum distance required to allow the bone drilling sequence through a static fully guided approach was analysed for four implant systems: Straumann, MIS Dentsply, Astra Tech Dentsply, and Dentium. The mean ± standard deviation maximum mouth opening (all 90 patients) was 46.34 ± 7.70 mm, 36.82 ± 5.92 mm, and 30.99 ± 5.40 mm in the incisal, premolar, and molar region, respectively. No significant difference in mouth opening at any of the three locations was found between the age groups (all P > 0.05). However, a correlation was found between increasing age and decreasing average mouth opening in all three mouth regions; each additional 1 year resulted in a mean reduction of 0.13 mm, 0.09 mm, and 0.08 mm in the incisal, premolar, and molar region, respectively. The minimum required mouth opening was most likely to be met for implant placement in the incisal region (98.9% of all patients) and least likely to be met for placement in the molar region, particularly for older patients (as low as 30% of patients). Mouth opening remains a major limitation in fully guided implant surgery, especially in posterior areas and in older patients. The use of some implant systems in the posterior area may be limited to only one in three patients.

Prosthetic Rehabilitation of All-on-Six Implant-Supported Prosthesis: A Case Report.

This clinical report explores the effectiveness of dental implants for rehabilitating fully edentulous arches, with a focus on the all-on-six treatment approach. Implant-supported fixed restorations, particularly using six implants, are presented as an expected and cost-effective solution for the rapid repair of the edentulous patient, avoiding the need for bone grafting. This report details the successful rehabilitation of a patient's completely edentulous arches using the all-on-six concept, highlighting the meticulous planning and execution involved. It concludes that precise diagnostic and implant planning, along with thorough attention to all the features, is crucial for successful implant-supported fixed prostheses, with the all-on-six concept offering improved clinical and radiological outcomes for atrophied maxillae.

Prosthodontic rehabilitation of two siblings with hypoplastic (type 1) amelogenesis imperfecta: A case report.

Amelogenesis imperfecta is a rare genetic disorder that interferes with normal enamel formation. Of the 4 main types of amelogenesis imperfecta, hypoplastic (type 1) is the most prevalent, characterized by a quantitative alteration in enamel. The pitting or reduced thickness of the enamel results in generalized hypersensitivity, increased susceptibility to caries and infection, attrition, and a loss in vertical dimension of occlusion. Prosthodontic management of these patients can be challenging not only functionally and restoratively, but also from an emotional and psychosocial standpoint. This clinical report describes the prosthodontic management and rehabilitation of two young adult siblings with hypoplastic (type 1) amelogenesis imperfecta.

Is scanning under rubber dam isolation a feasible approach for the execution of indirect restorations? / O escaneamento sob isolamento absoluto é uma técnica viável para execução de restaurações indiretas?

Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)

Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)

Evaluation of Factors Affecting Clinical Outcomes of Full Mouth Rehabilitation Under General Anaesthesia for Children With Early Childhood Caries: A Prospective Cohort Study.

AIM: This study was designed to evaluate the factors affecting the clinical outcomes of full mouth rehabilitation under general anaesthesia for children with early childhood caries (ECCs). MATERIALS AND METHODS: A prospective cohort of 200 children with early childhood caries and requiring dental rehabilitation under general anaesthesia was evaluated and treated. Children were recalled at six-month intervals for a period of two years and evaluated for the recurrence of caries and the need for repeat treatment of failed cases. RESULTS: 86.5% of the patients adhered to the six-month recall visits for 24 months. An overall caries recurrence rate of 14.5% was seen. Children who did not adhere to the follow-up plan and visited ad hoc had the highest caries recurrence rate (88%). CONCLUSION: Good compliance with postoperative instructions after full mouth rehabilitation resulted in good oral hygiene and a limited recurrence of caries. Patients with poor compliance with recall visits and postoperative instructions had high rates of caries recurrence. Rehabilitation under general anaesthesia can be considered a viable treatment option for children diagnosed with early childhood caries.

The Evaluation of Postoperative Complications and Oral Health-Related Quality of Life Following Dental General Anesthesia for Early Childhood Caries.

Aim The study aims to evaluate the postoperative complications and oral health-related quality of life (OHRQoL) following dental general anesthesia for early childhood caries (ECC). Materials and methods Two hundred children aged between three and six requiring full-mouth rehabilitation for general anesthesia were recruited for the study. Demographic data and oral health-related quality of life using the Early Childhood Oral Health Impact Scale (ECOHIS) were collected before the surgery. Postoperative complications and oral health-related quality of life were evaluated after 24 hours and at a one-week follow-up appointment. Results All 200 children returned for the follow-up appointment after one week. Pain was found to be the most common postoperative complication after 24 hours (52%) and one week (6%). The oral health-related quality of life showed a significant improvement after one week (P < 0.001) Conclusion Children may experience a postoperative complication after full-mouth rehabilitation, which resolves within a week. Dental pain was the most common operative complication in the present study. Oral health-related quality of life showed significant improvement after full-mouth rehabilitation.

Interdisciplinary rehabilitation using CAD-CAM technology for a young patient with severe malocclusion and amelogenesis imperfecta: A 5-year follow-up case report.

Treatment of acute cases of amelogenesis imperfecta is challenging in children due to the absence of a consensus statement on therapy recommendations. This article presents the effectiveness of an interdisciplinary approach, including orthodontics, orthognathic surgery, and prosthodontics using digital technology, in a child with amelogenesis imperfecta and skeletal deformities. The early management over a 6-year period had a very positive impact on the quality of life related to oral health. The full-mouth rehabilitation in adulthood with all-ceramic crowns showed a fully satisfactory result after 60 months of follow-up.

Precision of polyether ether ketone (PEEK) or cobalt-chrome implant bar fit to implants after mechanical cycling.

Based on its mechanical properties, PEEK (polyether-ether-ketone) might be useful in restorative procedures. In oral rehabilitation, its viability has been studied mainly for prostheses and dental implants. AIM: The aim of this study was to evaluate the fit accuracy of dental implant bars made of either PEEK or cobalt-chrome submitted to cycling mechanics. MATERIALS AND METHOD: This was an experimental in vitro study, where units were treated with two implants and mini-abutments, joined by cobalt-chrome or polyether-ether-ketone PEEK bars. A total 20 bars were prepared (n=10 per group) and subjected to mechanical cycling tests (1 million cycles on the distal cantilever of the bar in the vertical direction, 120N and sinusoidal loading, at a frequency of 2Hz). The fit at the abutment/implant interface was measured before and after cycling, and the counter-torque of the vertical screw of the mini abutments was measured after cycling, using a digital torquemeter. Data were analyzed by three-way ANOVA and Tukey's test at 5% significance level. RESULTS: No statistically significant interaction was found among the three factors considered (bar material, implant positioning and mechanical cycling) (p = 0.592). No significant difference was identified in the interaction between bar material and implant positioning (p = 0.321), or between implant positioning and mechanical cycling (p = 0.503). The association between bar material and mechanical cycling was statistically significant (p = 0.007), with the cobalt-chrome bar resulting in greater misfit with mechanical cycling. There was no difference in counter-torque values between groups. CONCLUSIONS: The PEEK bar provided better fit of the mini abutments to the implants, even after mechanical cycling. The counter-torque of the screws was similar in all scenarios considered.

O PEEK (Poli-éter-éter-cetona) é um material considerado para uso em procedimentos restauradores devido às suas propriedades mecânicas. Na reabilitação oral, sua viabilidade tem sido estudada principalmente para uso em próteses e implantes dentários. Objetivos: O objetivo deste estudo foi avaliar a precisão da adaptação de duas barras diferentes do tipo protocolo confeccionadas em PEEK ou Cobalto-Cromo, após serem submetidas à mecânica ciclística. Materiais e Método: As unidades experimentais foram constituídas por barras confeccionadas em Poli-ether-ether-Ketone (PEEK) e em Cobalto-Cromo (Co-Cr). Trata-se de um estudo experimental, in vitro, onde verificou-se unidades constituídas por dois implantes e mini pilares unidos com barras de Cobalto-Cromo ou PEEK. Foram confeccionados um total de 20 barras (n=10 em cada grupo) e as barras foram submetidas a ensaios de ciclagem mecânica (1 milhão de ciclos no cantilever distal da barra no sentido vertical, 120N e carregamento senoidal, a uma frequência de 2Hz). Antes e após a ciclagem realizou-se a mensuração da desadaptação na interface pilar/implante e após a ciclagem foi medido o contra-torque do parafuso vertical dos mini-pilares através de torquímetro digital TQ 8800 (LT Lutron, Taiwan). Os dados foram submetidos a ANOVA a três critérios e teste de Tukey ao nível de significância a 5%. Resultados: Constatou-se que não houve interação estatisticamente significativa entre os três fatores estudados, ou seja, entre o material da barra, o posicionamento do implante e a ciclagem mecânica (p = 0,592). Também não se identificou diferença estatística significativa da interação entre o material da barra e o posicionamento do implante (p = 0,321), nem entre o posicionamento do implante e a ciclagem mecânica (p = 0,503). Já a associação entre o material da barra e a ciclagem mecânica foi estatisticamente significativa (p = 0,007), onde a barra de Cobalto-Cromo resultou em maior desadaptação com a ciclagem mecânica. Não houve diferença nos valores dos contra-torques entre os grupos. Conclusões: Conclui-se que a barra de protocolo fabricada em PEEK proporcionou melhor adaptação dos mini pilares aos implantes mesmo após a ciclagem mecânica. Por fim, o contra-torque dos parafusos foi semelhante em todos os cenários avaliados.

Precision of polyether ether ketone (PEEK) or cobalt-chrome implant bar fit to implants after mechanical cycling / Precisão da adaptação de barras tipo protocolo confeccionados em polyetheretherketone (PEEK) ou cobalto cromo sobre implante após ciclagem mecânica

ABSTRACT Based on its mechanical properties, PEEK (polyether-ether-ketone) might be useful in restorative procedures. In oral rehabilitation, its viability has been studied mainly for prostheses and dental implants. Aim: The aim of this study was to evaluate the fit accuracy of dental implant bars made of either PEEK or cobalt-chrome submitted to cycling mechanics. Materials and Method: This was an experimental in vitro study, where units were treated with two implants and mini-abutments, joined by cobalt-chrome or polyether-ether-ketone PEEK bars. A total 20 bars were prepared (n=10 per group) and subjected to mechanical cycling tests (1 million cycles on the distal cantilever of the bar in the vertical direction, 120N and sinusoidal loading, at a frequency of 2Hz). The fit at the abutment/implant interface was measured before and after cycling, and the counter-torque of the vertical screw of the mini abutments was measured after cycling, using a digital torquemeter. Data were analyzed by three-way ANOVA and Tukey's test at 5% significance level. Results: No statistically significant interaction was found among the three factors considered (bar material, implant positioning and mechanical cycling) (p = 0.592). No significant difference was identified in the interaction between bar material and implant positioning (p = 0.321), or between implant positioning and mechanical cycling (p = 0.503). The association between bar material and mechanical cycling was statistically significant (p = 0.007), with the cobalt-chrome bar resulting in greater misfit with mechanical cycling. There was no difference in counter-torque values between groups. Conclusions: The PEEK bar provided better fit of the mini abutments to the implants, even after mechanical cycling. The counter-torque of the screws was similar in all scenarios considered.

RESUMO O PEEK (Poli-éter-éter-cetona) é um material considerado para uso em procedimentos restauradores devido às suas propriedades mecânicas. Na reabilitação oral, sua viabilidade tem sido estudada principalmente para uso em próteses e implantes dentários. Objetivos: O objetivo deste estudo foi avaliar a precisão da adaptação de duas barras diferentes do tipo protocolo confeccionadas em PEEK ou Cobalto-Cromo, após serem submetidas à mecânica ciclística. Materiais e Método: As unidades experimentais foram constituídas por barras confeccionadas em Poli-ether-ether-Ketone (PEEK) e em Cobalto-Cromo (Co-Cr). Trata-se de um estudo experimental, in vitro, onde verificou-se unidades constituídas por dois implantes e mini pilares unidos com barras de Cobalto-Cromo ou PEEK. Foram confeccionados um total de 20 barras (n=10 em cada grupo) e as barras foram submetidas a ensaios de ciclagem mecânica (1 milhão de ciclos no cantilever distal da barra no sentido vertical, 120N e carregamento senoidal, a uma frequência de 2Hz). Antes e após a ciclagem realizou-se a mensuração da desadaptação na interface pilar/implante e após a ciclagem foi medido o contra-torque do parafuso vertical dos mini-pilares através de torquímetro digital TQ 8800 (LT Lutron, Taiwan). Os dados foram submetidos a ANOVA a três critérios e teste de Tukey ao nível de significância a 5%. Resultados: Constatou-se que não houve interação estatisticamente significativa entre os três fatores estudados, ou seja, entre o material da barra, o posicionamento do implante e a ciclagem mecânica (p = 0,592). Também não se identificou diferença estatística significativa da interação entre o material da barra e o posicionamento do implante (p = 0,321), nem entre o posicionamento do implante e a ciclagem mecânica (p = 0,503). Já a associação entre o material da barra e a ciclagem mecânica foi estatisticamente significativa (p = 0,007), onde a barra de Cobalto-Cromo resultou em maior desadaptação com a ciclagem mecânica. Não houve diferença nos valores dos contra-torques entre os grupos. Conclusões: Conclui-se que a barra de protocolo fabricada em PEEK proporcionou melhor adaptação dos mini pilares aos implantes mesmo após a ciclagem mecânica. Por fim, o contra-torque dos parafusos foi semelhante em todos os cenários avaliados.

Autotransplante dentário: da previsibilidade à técnica cirúrgica e resultados do tratamento / Dental Autotransplantation: from predictability to surgical technique and treatment results

Objetivo: apresentar o relato de duas pacientes com agenesias dentárias em que cinco dentes autotransplantados foram utilizados como modalidade de tratamento. Além disso, objetiva-se mostrar questões sobre a técnica cirúrgica, suas indicações e previsibilidade. Relato de caso: Neste estudo, foram relatados 5 casos de autotransplante dentário em duas pacientes jovens, em que a equipe realizou os procedimentos e o acompanhamento clínico e radiográfico por 5 e 7 anos. Devido à alta sensibilidade da técnica, foram seguidos princípios previamente estabelecidos na literatura envolvendo o autotransplante dentário. Durante o período de acompanhamento, os dentes se mantiveram em posição e em função e as pacientes não apresentavam queixas associadas. Considerações finais: a técnica do autotransplante dentário, quando bem indicada e executada, é capaz de promover resultados bastante satisfatórios, sendo uma ótima alternativa reabilitadora, com taxas de sucesso elevadas e custos reduzidos. No entanto, critérios em relação aos sítios doadores e receptores e a habilidade do cirurgião devem ser levados em conta para o sucesso do técnica.

Objective: presenting the report of two patients with tooth agenesis in which five autotransplanted teeth were used as a treatment modality. Furthermore, the aim is to show questions about the surgical technique and its indications and predictability. Case report: In this study, 5 cases of dental autotransplantation were reported in two young patients, in which the team performed procedures and had clinical and radiographic follow-up for 5 and 7 years. Due to the high sensitivity of the technique, principles previously established in the literature involving dental autotransplantation were followed. During the follow-up period, the teeth remained in position and function and the patients had no associated complaints. Final considerations: the dental autotransplantation technique, when well indicated and executed, is capable of achieving very satisfactory results, being a great rehabilitative alternative, with high success rates and reduced costs. However, criteria regarding donor and receptor sites and the surgeon's skill must be taken into account for the success of the technique.

Evaluation of Change in Quality of Life, Dental Fear and Dental Anxiety in Young Children Following Full-mouth Dental Rehabilitation under General Anesthesia for Early Childhood Caries.

AIM: To evaluate the change in quality of life, dental fear, and dental anxiety in young children following full-mouth dental rehabilitation under general anesthesia for early childhood caries. MATERIALS AND METHODS: About 200 children who were diagnosed with early childhood caries requiring full-mouth rehabilitation under general anesthesia were recruited after obtaining parental consent. Oral health-related quality of life (OHRQoL) was measured using the Early Childhood Oral Health Impact Scale (ECOHIS). Dental fear was evaluated using Children's Fear Survey Schedule-Dental Subscale and dental anxiety was evaluated using the Facial Image Scale. Scores were taken on the day of intervention, and after 14 days when the child reported for posttreatment follow-up. RESULTS: All 200 participants returned for a follow-up visit after 2 weeks. The child impact section was reduced from 15.7 ± 4.1 to 7.7 ± 1.9 after treatment. The family impact section was reduced from 9.6 ± 2.7 to 3.5 ± 2.6 after treatment. A statistically significant difference was seen in both sections when pre-and posttreatment values were compared (p < 0.001). The total ECOHIS showed statistically significant improvement as the pretreatment score of 21.6 ± 9.5 reduced to 11.2 ± 4.2 showing 51.9% improvement in OHRQoL after full-mouth rehabilitation under general anesthesia was done (p < 0.001). Dental fear and anxiety among the participants showed a statistically significant reduction after treatment was done and most participants were found to be less fearful of doctors, dentists, and injections after treatment. CONCLUSION: Full-mouth rehabilitation was found to be a reliable treatment modality to improve the OHRQoL of children suffering from early childhood caries. CLINICAL SIGNIFICANCE: Significant improvement was seen in the OHRQoL within 2 weeks after treatment and most participants were found to be less anxious and fearful toward dentists and dental treatment. Comprehensive dental rehabilitation under general anesthesia has been proven to be an effective treatment modality for early childhood caries and a productive treatment technique to reduce dental fear and anxiety.

Associated short and regular implants for complete denture retention in an atrophic mandible: clinical follow-up / Implantes corto y regular asociados para retención de prótesis completa en mandíbula atrófica: seguimiento clínico / Implantes curto e regular associados para retenção de prótese total em mandíbula atrófica: acompanhamento clínico

Objective: to present the radiographic clinical follow-up of the prosthetic rehabilitation of a patient with an atrophic mandible, with the installation of short implants associated with an implant of regular length. Method: case report of a completely edentulous patient with an atrophic mandible and a 6-year radiographic clinical follow-up conducted at the dental clinic of the Federal University of Piauí, Teresina, from February 2011 to January 2020. After collecting sociodemographic data, health records, clinical radiographic examinations, and prosthetic surgical planning, four dental implants were installed between the mental foramina. After three months, mini-conical abutments and a fixed prosthesis screwed onto the implants were installed and monitored every six months for a period of six years. Results: the clinical evaluation revealed tissue stability without significant peri-implant changes after the follow-up period. Radiographically, bone resorption was not observed around the implant. Stability of the prosthesis and absence of prosthetic complications were observed during the follow-up period. Conclusion: short implants associated with regular-length implants can be placed in the anterior region of an atrophic mandible for rehabilitation with fixed complete dentures.

Objetivo: apresentar o acompanhamento clínico radiográfico da reabilitação protética de um paciente com mandíbula atrófica com a instalação de implantes curtos associados a um implante de comprimento regular. Método: relato de caso de uma paciente desdentada total com mandíbula atrófica, e acompanhamento clínico radiográfico de seis anos, realizado na clínica odontológica da Universidade Federal de Piauí, Teresina, no período de fevereiro de 2011 a janeiro de 2020. Após coleta de dados sociodemográficos e registro de saúde, exames clínicos radiográficos e planejamento cirúrgico protético, foram instalados quatro implantes dentários entre os forames mentonianos. Após o período de três meses foram instalados mini pilares cônicos e uma prótese fixa aparafusada sobre os implantes que foi acompanhada a cada seis meses por um período de seis anos. Resultados: as avaliações clínicas mostraram estabilidade tecidual sem alterações peri-implantares significativas após o período de acompanhamento. Radiograficamente foi observada a manutenção sem reabsorção óssea ao redor dos implantes. A estabilidade da prótese e a ausência de complicações protéticas foram observadas clinicamente durante o período de acompanhamento. Conclusão: os implantes curtos associados a implante de comprimento regular podem ser colocados na região anterior da mandíbula atrófica para reabilitação com prótese total fixa.

Reclaiming the Smile: Full Mouth Rehabilitation of a Generalized Attrition Patient Using the Hobo Twin-Stage Technique.

This clinical report details the successful rehabilitation of a 63-year-old male patient with severe tooth wear, a reduced vertical dimension of occlusion, and esthetic concerns. The Hobo twin-stage procedure addressed these issues while improving the patient's oral health and quality of life. After ensuring adequate oral hygiene, the treatment began with scaling and root planning, followed by diagnostic impressions. An occlusal splint was fabricated, followed by a diagnostic wax-up and tooth preparation. Full-arch impressions of prepared teeth were made using the addition of silicon elastomeric impression material, and chairside provisional crowns were fabricated. The working casts were mounted on a semi-adjustable articulator, and the metal copings were tried on before being built up in porcelain. The patient achieved successful outcomes and expressed satisfaction with the treatment. The Hobo twin-stage technique and porcelain-fused-to-metal crowns can be viable approaches for restoring the teeth's form and function while enhancing the patient's oral health and esthetics. However, regular follow-up appointments and good oral hygiene maintenance are essential for the long-term success of the treatment.

Oral Rehabilitation of a Patient with Papillon Lefèvre Syndrome Using Fixed Full-Arch Hybrid Prostheses Supported by Four Axially Loaded Implants: A Case Report with Four-Year Follow-up.

This report details the successful prosthetic rehabilitation of a 25-year-old male patient with Papillon Lefèvre Syndrome (PLS) using an implant-supported hybrid prosthesis. Six implants were placed in the maxilla, and four were placed in the mandibular arch. All implants were inserted axially (non-tilted) and were planned to be loaded after a healing period of 6 months. One implant failed due to graft loss during the healing phase, which was removed and the remaining implants were restored with a hybrid prosthesis after 6 months, using the delayed loading protocol. The patient was followed-up for four years and all the remaining implants successfully integrated and remained fully functional during this period. The prosthesis significantly improved the functional, aesthetic, and psychological well-being of the patient. This case report is the first of its kind to use only four axially placed implants for rehabilitation of a PLS patient with a successful four-year follow-up.

Restorative Rehabilitation of a Patient With Tooth Wear: A One-Year Clinical Follow-Up Report.

Tooth wear is a multifactorial process of complex aetiology. It may be considered a physiological or pathological process depending upon the rate and degree of occurrence. The patients may present with symptoms of sensitivity, pain, headaches or recurrent loss of restorations and prostheses, leading to loss of function. This case report describes the rehabilitation of a 65-year-old male patient with intrinsic dental erosion combined with generalised attrition. The restorative treatment aimed at restoring anterior guidance, establishing a stable occlusion for the patient with minimal intervention.

Managing the transition to a complex full mouth rehabilitation utilizing injectable composite.

OBJECTIVE: This article describes the use of flowable injectable composite resins to facilitate transitional treatment of a complex complete mouth rehabilitation. CLINICAL CONSIDERATIONS: Some patients require urgent and complex complete mouth rehabilitations that are time and cost intensive. Financial considerations can prevent some patients from pursuing treatment. This can result in the oral conditions worsening over time and compromising the long-term prognosis of the teeth. CONCLUSIONS: Injectable composite resins can be used as a transitional bonding material for complex cases using an injection molding technique utilizing clear indices obtained from a diagnostic waxing. This allows for a full mouth rehabilitation to be performed in a single appointment, producing instant results. CLINICAL SIGNIFICANCE: Transitioning with injectable composite as demonstrated in this case will immediately stabilize an otherwise deteriorating situation in a cost-effective way and allows patients to address the realities of financial or time constraints when transitioning to more durable porcelain restorations over a period of years.

Handgrip force and bite force in dentulous and edentulous individuals.

BACKGROUND: The literature is unclear about bite force (BF) and handgrip force (HF) in a specific group of different ages and dentate conditions, or even a predictive model for each specific group, using BF and HF as factors. OBJECTIVE: To establish the correlation between HF and BF in female participants with distinct ages and dentate conditions; also create a predictive model of BF as a function of HF. METHODS: Participants were divided into three groups (GI: young natural dentate women, n = 65; GII: adult natural dentate women, n = 67; and GIII: edentulous women users of bimaxillary complete dentures, n = 67) and subjected to an HF measurement test using a digital dynamometer. Subsequently, BF was measured using a digital gnathodynamometer in the molar region. Pearson correlation coefficient (r) and multivariate analysis of variance (α = 0.05) were performed, and simple linear regression was used to obtain a model to predict BF from HF for each group separately (α = 0.05). RESULTS: All groups presented moderate and strong correlations among the variables (GI: r = 0.838; GII: r = 0.714; GIII: r = 0.646). A significant difference in BF was observed (GI > GII > GIII; p < .05). GIII presented a significantly lower HF than the other groups (p < .05). Besides, three equations predicting BF, using HF, were obtained for use in young/adult dentate and edentulous women. CONCLUSION: All groups found a positive and significant correlation between BF, HF and groups. HF can be a simple and efficient method for predicting BF using the predictive models developed for women with good health.